Installation
Eaton 9135 5000/6000 VA UPS User’s Guide 164201726—Rev 4 www.eaton.com/powerquality 19
Figure 5. Removing the Battery Tray
3. Place the cabinet on a flat, stable surface with the front of the cabinet facing you.
4. Align the mounting brackets with the screw holes on the side of the cabinet and secure with the supplied
M4x6 mm flat-head screws.
5. If installing additional cabinets, repeat Steps 3 and 4 for each cabinet.
Figure 6. Installing the Mounting Brackets
NOTE You can adjust the position of the mounting brackets.
To Next Page
Loading...
