WARRANTY
Eaton 9155 UPS (8–15 kVA) User's Guide S 164201553 Rev G (www.eaton.com/powerquality)
82
LIMITATION OF LIABILITY: The remedies of the End-User set forth herein are exclusive and are the sole remedies for any failure of Company to
comply with its obligations hereunder. In no event shall Company be liable in contract, in tort (including negligence or strict liability) or otherwise for
damage to property or equipment other than the Products, including loss of profits or revenue, loss of use of Products, loss of data, cost of capital,
claims of customers of the End-User or any special, indirect, incidental, or consequential damages whatsoever. The total cumulative liability of
Company hereunder whether the claims are based in contract (including indemnity), in tort (including negligence or strict liability) or otherwise, shall
not exceed the price of the Product on which such liability is based.
Company shall not be responsible for failure to provide service or parts due to causes beyond Company's reasonable control.
END-USER'S OBLIGATIONS: In order to receive the benefits of this Warranty, the End-User must use the Product in a normal way; follow the
Product's user's guide; and protect against further damage to the Product if there is a covered defect.
OTHER LIMITATIONS: Company's obligations under this Warranty are expressly conditioned upon receipt by Company of all payments due to it
(including interest charges, if any). During such time as Company has not received payment of any amount due to it for the Product, in accordance
with the contract terms under which the Product is sold, Company shall have no obligation under this Warranty. Also during such time, the period
of this Warranty shall continue to run and the expiration of this Warranty shall not be extended upon payment of any overdue or unpaid amounts.
COSTS NOT RELATED TO WARRANTY: The End-User shall be invoiced for, and shall pay for, all services not expressly provided for by the terms of
this Warranty, including without limitation, site calls involving an inspection that determines no corrective maintenance is required. Any costs for
replacement equipment, installation, materials, freight charges, travel expenses or labor of Company representatives outside the terms of this
Warranty will be borne by the End-User.
OBTAINING WARRANTY SERVICE: In the USA, call the Customer Reliability Center 7x24 at 800-356-5737. Outside of the USA, contact your local
Eaton product sales or service representative. For comments or questions about this Warranty, write to the Customer Quality Representative, 3301
Spring Forest Road, Raleigh, North Carolina 27616 USA.
Load Protection Guarantee (US and Canada)
Eaton UPS Models 3105, 5110, 5115, 5125, 5130, 9120, 9125, 9130, 9135, 9140, 9150, 9155, 9170+, and FERRUPS
GUARANTOR: The Guarantor for the load protection guaranty set forth herein is Eaton Corporation Inc. or its subsidiaries and affiliates.
Corporation, an Ohio Corporation company (“Company”).
LIMITED GUARANTY: This load protection guaranty (this “Guaranty”) applies only to the original End-User (the “End-User”) of any Eaton 3105,
5110, 5115, 5125, 5130, 9120, 9125, 9130, 9135, 9140, 9150, 9155, 9170+, and FERRUPS Products (individually and collectively, the “Product”)
and cannot be transferred. This Guaranty applies even in the event that the Product is initially sold by Company for resale to an End-User.
WHAT THIS GUARANTY COVERS: For the lifetime of the Product, Guarantor promises to repair or replace, at Guarantor's option, the equipment
(valued up to the limits shown below*) that is damaged by an AC power line surge, spike, or other transient when properly connected to
Guarantor's uninterruptible power system (“UPS”). Reimbursement for or restoration of data loss excluded. This Guaranty applies only if all of the
following circumstances arise:
1. The UPS is plugged into properly grounded and wired outlets, using no extension cords, adapters, other ground wires, or other electrical
connectors;
2. The installation of the UPS complies with all applicable electrical and safety codes described by the National Electrical Code (NEC);
3. The UPS was used under normal operating conditions and in accordance with all labels and instructions; and
4. The UPS was not damaged by accident (other than AC power line transient), misuse, or abuse.
*Cumulative Limits to be paid by Guarantor under this Load Protection Guaranty:
S $25,000 for Eaton UPS Model 3105
S $150,000 for Eaton UPS Models 5110, 5115, 5125, and 5130
S $250,000 for Eaton UPS Models 9120, 9125, 9130, 9135, 9140, 9150, 9155, 9170+, and FERRUPS products
WHAT THIS GUARANTY DOES NOT COVER: Any reimbursement or repair to End-User's equipment does not include reimbursement for or
restoration of any data loss. This Guaranty does not cover any defects or damages caused by: (a) failure to properly store the Product before
installation, including the charge of batteries no later than the date indicated on the packaging; (b) shipping and delivery of the Product if shipping is
FOB Factory; (c) neglect, accident, abuse, misuse, misapplication, or incorrect installation of Product; (d) repair or alteration of Product not
authorized in writing by Company personnel or performed by an authorized Company Customer Service Engineer or Agent; (e) improper testing,
operation, maintenance, adjustment, or modification of any kind to the Product not authorized in writing by Company personnel or performed by an
authorized Company Customer Service Engineer or Agent; or (f) use of the Product under other than normal operating conditions or in a manner
inconsistent with the Product's labels or instructions.
This Guaranty is not valid: (a) unless the End-User returns to Company the Warranty Registration Card or completes the registration form on
http://powerquality.eaton.com/ProductRegistration within thirty (30) days of purchase; or (b) if the Product's serial numbers have been removed
or are illegible.
Company shall not be responsible for any charges for testing, checking, removal, or installation of any items.
To Next Page
Loading...
