INTERNAL BATTERY INSTALLATION
Eaton 9355-F47 Unirom UPS (10/15 kVA) User's Guide S 164201642 Rev C www.eaton.com/powerquality
38
4. The battery cover panel is made up of two parts joined together
with four screws. Remove both parts of the panel at the same time
by removing the 10 M4 screws on the edges of the panel and the
M4 screw in the middle of the panel (see Figure 18).
M4 Screws
Figure 18. Removing the Battery Cover Panel
To Next Page
Loading...
