What does 'Battery over voltage' mean on my Eaton UPS?
When the battery is over charged, Eaton UPS switches to battery mode automatically. After the battery voltage returns to normal and the mains is normal, the UPS switches back to line mode automatically.
General| Output Power | 1800 W |
|---|---|
| Waveform | Pure Sinewave |
| Form Factor | Tower |
| Power Rating | 2000 VA |
| Topology | Online Double Conversion |
| Output Voltage | 230V |
| Output Frequency | 50/60 Hz |
| Battery Type | Sealed Lead Acid |
| Typical Recharge Time | 4 hours |
| Communication | USB, RS232 |
| Operating Temperature | 0 to 40°C |
Instructions for safely installing the UPS unit.
Guidelines for operating the UPS system safely.
Procedures for maintaining and servicing the UPS, and troubleshooting common issues.
Explains the functions of the buttons on the UPS panel.
Instructions on how to connect the UPS to power and loads.
How to connect external batteries for UPS models with extended backup.
Procedures for powering on the UPS with or without mains power connected.
Steps to safely shut down the UPS in different operating modes.
How the UPS indicates abnormal conditions and faults on the LCD.
To Next Page
