Page 17
5-6kVA US_EN
ENGLISH
3. Installation
3.3 Checking the accessory kit
• Verify that the following additional items are included with the UPS:
1
4
2
10
8
7 9
5
6
6
3
11
12
13
14
1
(2)Tower stands
2
Rack kit for 19-inch enclosures
3
Cable gland for Output connection
Additional cable gland for Input
(for 9PX 6000 G only)
4
Network card-MS communication card
5
RS232 communication cable
6
USB communication cable
7
User manual
8
Safety instructions
9
Warranty sheet
10
Software CD-ROM
11
Screwdriver
12
(2) cable lockers for 16A outlets
(for 9PX 6000 G only)
13
(2) cable lockers for 10A outlets
(for 9PX 6000 G only)
14
(2) IEC 10A cables (for 9PX 6000 G only)
• If you ordered an optional Extended Battery Module (EBM), verify that the following additional items are
included with the EBM:
3
4
2
1
1
Battery power cable, attached with battery
detection cable
2
Stabilizer bracket (4 screws included)
3
Rack kit for 19-inch enclosures
4
EBM Installation manual
Discard the EBM user’s guide if you are installing the EBM with a new UPS at the same time.
Use the UPS user’s guide to install both the UPS and the EBM.
If you ordered other UPS accessories, refer to specific user manuals to check the packing
contents.
To Next Page
Loading...
