3) Remove the foam and plastic bag around
the unit.
4) Move the frame smoothly from the pallet
to the ground or the reserved position for
installation with a forklift.
Chapter 2 Exterior appearance
2.1 Unpacking inspection
1. The UPS packing case should contain the following:
1) UPS.
2) Accessories including user manual, Winpower Disc and two door keys.
2. Check for transportation damage. Should any damage be observed or parts
found missing, do not start the machine. Contact the forwarder and distributor
immediately.
1) Remove the top cover plate by removing
the wood screws.
2) Remove the packing cardboard from
the sides of the unit.
3
Note: Make sure that door widths and heights are adequate prior to installation.
To Next Page
Loading...
