Eaton E Series - Page 29

Latched Inactive
Ack signal - . -
LED Active Color Green
LED Inactive Color -
Assignment 1 Prot . Active
Inverting 1 Inactive
Assignment 2 - . -
Inverting 2 Inactive
Assignment 3 - . -
Inverting 3 Inactive
Assignment 4 - . -
Inverting 4 Inactive
Assignment 5 - . -
Inverting 5 Inactive
Name Value
Device Para/LEDs/LEDs group A/LED 1]
Edit Value
Value Details
Green
LED Active Color
Range of Values: Select a value from the drop down
Access Level: Supervisor-Lv3
The LED lights up in this color if the state of
the OR-assignment of the signals is
true.
OK Cancel Help
Next
Previous
E_FBA
A double-click opens a small dialog window, which lists all settings in this menu item, and a
double-click on a setting opens another dialog that allows for modifying the settings value.
Note, however, that any parameter change becomes e󰊞ective only after it has been
transferred (from PowerPort-E) into the device:
⚙
1. ▷
Click on [Device → Transfer only modi󰅰ed Parameters into the Device] (or, alternatively,
press »Ctrl«+»F7« on your keyboard, or click on the small icon with the blue arrow
pointing leftward).
29www.eaton.comE-Series Family Quick Start Guide
2 Quick Start – Operating Software PowerPort-E
2.2 Operation via PowerPort-E