Eaton E Series - Page 48

Operational
Info
Ack/Rst
Ok
CTRL
E_FB6
Bkr[1].CLOSE
Confirmation
YesNo
?
Are you sure?
After pressing the “CLOSE” Softkey you get a
con󰊟rmation dialog.
Operational
Info
Ack/Rst
Ok
CTRL
E_FB7
Mode Bkr
Local
Bkr[1]
The new position of the switchgear device
is shown on the display (as soon as it has
been reached according to the feedback of
the position indication, or after the con󰊟gured
switching time has elapsed).
Moreover, the functionality of the Softkeys
changes so that the new permitted switching
operations are available.
48 www.eaton.com E-Series Family Quick Start Guide
3 Quick Start – Operation via Panel
3.9 “CTRL” key – Control Switchgear Devices