Eaton E Series - Page 51

status indication from the Lockout Relay, only
one of these two Softkeys is visible: If, for
instance, a particular relay is already closed,
i. e. in state RESET, only the “TRIP” is visible.)
Operational
Info
Ack/Rst
Ok
CTRL
EBR-3000_FB6
86Trip.TRIP
Confirmation
YesNo
?
Are you sure?
After pressing the Softkey for the required
switching operation, e. g. the “TRIP” Softkey,
you get a con󰊟rmation dialog, just the same
way as you have already seen for parameter
changes.
Operational
Info
Ack/Rst
Ok
CTRL
EBR-3000_FB7
Mode 86
Local
86CT 86Trip
The new state of the Lockout Relay is shown on
the display as soon as it has been reached.
The functionality of the Softkeys changes so
that the new permitted switching operations
are available.
51www.eaton.comE-Series Family Quick Start Guide
3 Quick Start – Operation via Panel
3.10 Control Lockout Relays via Panel – Example of a Switching Operation