Eaton E Series - Page 74

E_FBN
Number of successfully converted values:
6018
Detailed info about added and deleted parameter:
Name Value
Print... Close Help
Convert "EDR-3000" Parameter (from version "3.0.c" to version "3.5.a")
Number of added values with default settings:
0
Number of deleted values, which are no longer available:
0
Fig. 7: Conversion summary.
Just like with a typecode conversion (╚═▷ “Modify Device Con󰊟guration (Typecode)”),
PowerPort-E performs various validity and consistency checks and reports any problems.
The bigger the di󰊞erence is between the versions, the more settings will have to be added
(or deleted), and it becomes likely that consistency problems are found, which are then
marked by question mark “?” tokens, as described in ╚═▷ “3.11 Assisting Tokens”. All
settings problems must be corrected carefully, before they can be transferred to the device.
Since new 󰊟rmware versions come with new features, the conversion can do nothing about
this but simply adding the respective new settings with only their default values. These
defaults usually set the new feature “Inactive”, which might or might not match your
application needs. So, after all, you should never trust an automatic conversion! Always
have a look yourself before you go live with the settings.
74 www.eaton.com E-Series Family Quick Start Guide
5 Con󰊟guration via PowerPort-E
5.1 Con󰊟guration File