Eaton EDR-5000 - Page 121

EDR-5000 IM02602007E
Parameter Description Setting range Default Menu path
Inverting 4 Inverting of the state of the assigned signal. Inactive,
Active
Inactive [Device Para
/Relay Outputs
/RO-6 X5
/RO 6]
Assignment 5 Assignment 1..n, Assignment
List
-.- [Device Para
/Relay Outputs
/RO-6 X5
/RO 6]
Inverting 5 Inverting of the state of the assigned signal. Inactive,
Active
Inactive [Device Para
/Relay Outputs
/RO-6 X5
/RO 6]
Assignment 6 Assignment 1..n, Assignment
List
-.- [Device Para
/Relay Outputs
/RO-6 X5
/RO 6]
Inverting 6 Inverting of the state of the assigned signal. Inactive,
Active
Inactive [Device Para
/Relay Outputs
/RO-6 X5
/RO 6]
Assignment 7 Assignment 1..n, Assignment
List
-.- [Device Para
/Relay Outputs
/RO-6 X5
/RO 6]
Inverting 7 Inverting of the state of the assigned signal. Inactive,
Active
Inactive [Device Para
/Relay Outputs
/RO-6 X5
/RO 6]
DISARMED Ctrl Enables and disables the disarming of the relay outputs.
This is the first step of a two step process, to inhibit the
operation or the relay outputs. Please refer to
"DISARMED" for the second step.
Inactive,
Active
Inactive [Service
/Test Mode (Prot
inhibit)
/WARNING! Cont?
/DISARMED
/RO-6 X5]
www.eaton.com 121