Eaton EDR-5000 - Changing Passwords Via Power-Port-E; Password Entry at the Panel; Password Forgotten

EDR-5000 IM02602007E
Changing Passwords via Power-Port-E
Download the parameter file from the device.
Passwords can be changed by a double-click within menu [Device Para\Password\Change Password] on the
corresponding password.
Enter the old password and the new password twice
Confirm the changes by a cklick on »OK«.
Password Entry at the Panel
Passwords can be entered by way of the Softkeys.
1 2 3 4
Example: For password (3244) press successively:
Softkey 3
Softkey 2
Softkey 4
Softkey 4
Password Forgotten
By pressing the »C« key during cold booting a reset menu will be called up. By selecting »Reset All Passwords?« and
confirming with »Yes« all passwords will be reset to the defaults »1234« .
www.eaton.com 345