Eaton EDR-5000 - System Module Input States

EDR-5000 IM02602007E
System Module Input States
Name Description Assignment via
Ack LED-I Module Input State: LEDs Acknowledgment by Digital Input. [Device Para
/Ex Acknowledge]
Ack RO-I Module Input State: Acknowledgment of the Relay Outputs. [Device Para
/Ex Acknowledge]
Ack Comm-I Module Input State: Acknowledge Communication via Digital Input.
The replica that Communication has received from the device is to
be reset.
[Device Para
/Ex Acknowledge]
PS1-I State of the module input, respectively of the signal, that should
activate this Parameter Setting Group.
[Protection Para
/PSet-Switch]
PS2-I State of the module input, respectively of the signal, that should
activate this Parameter Setting Group.
[Protection Para
/PSet-Switch]
PS3-I State of the module input, respectively of the signal, that should
activate this Parameter Setting Group.
[Protection Para
/PSet-Switch]
PS4-I State of the module input, respectively of the signal, that should
activate this Parameter Setting Group.
[Protection Para
/PSet-Switch]
Maint Mode-I Module Input State: Arc Flash Reduction Maintenance Switch [Service
/Maint Mode]
www.eaton.com 290