Eaton EDR-5000 - Protection Module Input States; Protection Module Signals (Output States)

EDR-5000 IM02602007E
Protection Module Input States
Name Description Assignment via
ExBlo1-I Module Input State: External Blocking1 [Protection Para
/Global Prot Para
/Prot]
ExBlo2-I Module Input State: External Blocking2 [Protection Para
/Global Prot Para
/Prot]
Protection Module Signals (Output States)
Signal Description
Available Signal: Protection is available.
Active Signal: Active
ExBlo Signal: External Blocking
Pickup Phase A Signal: General Pickup Phase A
Pickup Phase B Signal: General Pickup Phase B
Pickup Phase C Signal: General Pickup Phase C
Pickup IX or IR Signal: General Pickup - Ground Fault
Pickup Signal: General Pickup
Trip Phase A Signal: General Trip Phase A
Trip Phase B Signal: General Trip Phase B
Trip Phase C Signal: General Trip Phase C
Trip IX or IR Signal: General Trip Ground Fault
Trip Signal: General Trip
Res Fault a Mains No Signal: Resetting of fault number and number of grid faults.
I dir fwd Signal: Phase current failure forward direction
I dir rev Signal: Phase current failure reverse direction
I dir n poss Signal: Phase fault - missing reference voltage
IR dir fwd Signal: IR Ground fault (calculated) forward
IR dir rev Signal: IR Ground fault (calculated) reverse direction
IR dir n poss Signal: IR Ground fault (calculated) direction detection not possible
IX dir fwd Signal: IX Ground fault (measured) forward
IX dir rev Signal: IX Ground fault (measured) reverse direction
IX dir n poss Signal: IX Ground fault (measured) direction detection not possible
www.eaton.com 386