Eaton EDR-5000 - Voltage - Measured Values

EDR-5000 IM02602007E
Voltage - Measured Values
VT
The first measuring input on the first measuring card (slot with the lowest number) is used as the reference angle.
E.g. » VA« respectively » VAB« .
Value Description Menu path
f Measured Value: Frequency [Operation
/Measured Values
/Voltage RMS]
VAB Fund. Measured value: Phase-to-phase voltage (Fundamental) [Operation
/Measured Values
/Voltage Fund.]
VBC Fund. Measured value: Phase-to-phase voltage (Fundamental) [Operation
/Measured Values
/Voltage Fund.]
VCA Fund. Measured value: Phase-to-phase voltage (Fundamental) [Operation
/Measured Values
/Voltage Fund.]
VA Fund. Measured value: Phase-to-neutral voltage (Fundamental) [Operation
/Measured Values
/Voltage Fund.]
VB Fund. Measured value: Phase-to-neutral voltage (Fundamental) [Operation
/Measured Values
/Voltage Fund.]
VC Fund. Measured value: Phase-to-neutral voltage (Fundamental) [Operation
/Measured Values
/Voltage Fund.]
VX meas Fund. Measured value (measured): VX measured (Fundamental) [Operation
/Measured Values
/Voltage Fund.]
VR calc Fund. Measured value (calculated): VR (Fundamental) [Operation
/Measured Values
/Voltage Fund.]
V0 Fund. Measured value (calculated): Symmetrical components Zero
voltage(Fundamental)
[Operation
/Measured Values
/Voltage Fund.]
www.eaton.com 183