Eaton EDR-5000 - Page 135

EDR-5000 IM02602007E
Parameter Description Setting range Default Menu path
Inverting 2 Inverting of the state of the assigned signal. Inactive,
Active
Inactive [Device Para
/LEDs
/LEDs group A
/LED 1]
Assignment 3 Assignment 1..n, Assignment
List
-.- [Device Para
/LEDs
/LEDs group A
/LED 1]
Inverting 3 Inverting of the state of the assigned signal. Inactive,
Active
Inactive [Device Para
/LEDs
/LEDs group A
/LED 1]
Assignment 4 Assignment 1..n, Assignment
List
-.- [Device Para
/LEDs
/LEDs group A
/LED 1]
Inverting 4 Inverting of the state of the assigned signal. Inactive,
Active
Inactive [Device Para
/LEDs
/LEDs group A
/LED 1]
Assignment 5 Assignment 1..n, Assignment
List
-.- [Device Para
/LEDs
/LEDs group A
/LED 1]
Inverting 5 Inverting of the state of the assigned signal. Inactive,
Active
Inactive [Device Para
/LEDs
/LEDs group A
/LED 1]
Latched Defines whether the LED will be latched when it picks up. Inactive,
Active
LEDs group A:
Active
LEDs group B:
Inactive
[Device Para
/LEDs
/LEDs group A
/LED 2]
Ack signal Acknowledgment signal for the LED. If latching is set to
active the LED can only be acknowledged if all signals
that initiated the setting of the LED are no longer present.
Only available if: Latched = Active
1..n, LEDAcknList -.- [Device Para
/LEDs
/LEDs group A
/LED 2]
www.eaton.com 135