EDR-5000 IM02602007E
Energy Units (applies only for devices with energy measurement)
By means of the parameter »
Energy Units«
the User can determine how measured values are to be displayed within
the HMI and
PowerPort-E
:
Energy Auto Scaling
kWh, kVArh or kVAh
MWh, MVArh or MVAh
GWh, GVArh or GVAh
In case of an overflow of the counter, the counter will start counting again at zero. A corresponding signal will indicate
the counter overflow.
Counter overflow at:
Energy Auto Scaling
Depends on the settings for the current and voltage transformers
kWh, kVArh or kVAh
999,999.99
MWh, MVArh or MVAh
999,999.99
GWh, GVArh or GVAh
999,999.99
Temperature Unit
(applies only for devices with temperature measurement)
By means of the parameter »
Temperature Unit«
the User can determine how measured values are to be displayed
within the HMI and
PowerPort-E
:
° Celsius
° Fahrenheit
www.eaton.com 179
To Next Page
Loading...
