Eaton EMR-4000 - Page 392

EMR-4000 IM02602009E
Parameter Description Setting range Default Menu path
Trigger19 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds 27A[1].TripCmd [Control
/Bkr
/Trip Manager]
Trigger20 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds 27A[2].TripCmd [Control
/Bkr
/Trip Manager]
Trigger21 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds 59A[1].TripCmd [Control
/Bkr
/Trip Manager]
Trigger22 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds 59A[2].TripCmd [Control
/Bkr
/Trip Manager]
Trigger23 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/Bkr
/Trip Manager]
Trigger24 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds -.- [Control
/Bkr
/Trip Manager]
Trigger25 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds 46[1].TripCmd [Control
/Bkr
/Trip Manager]
Trigger26 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds 46[2].TripCmd [Control
/Bkr
/Trip Manager]
Trigger27 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds 47[1].TripCmd [Control
/Bkr
/Trip Manager]
Trigger28 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds 47[2].TripCmd [Control
/Bkr
/Trip Manager]
Trigger29 Open Command to the Breaker if the state of the
assigned signal becomes true.
1..n, Trip Cmds 81[1].TripCmd [Control
/Bkr
/Trip Manager]
www.eaton.com 392