Eaton EMR-4000 - Page 965

EMR-4000 IM02602009E
Name Description
URTD.LB2 Superv Signal: Supervision Channel LB2
URTD.Aux1 Superv Signal: Supervision Channel Aux1
URTD.Aux2 Superv Signal: Supervision Channel Aux2
URTD.Superv Signal: URTD Supervision Channel
URTD.active Signal: URTD active
URTD.Outs forced Signal: The State of at least one Relay Output has been set by force. That means that the state of at least one
Relay is forced and hence does not show the state of the assigned signals.
RTD.Active Signal: Active
RTD.ExBlo Signal: External Blocking
RTD.Blo TripCmd Signal: Trip Command blocked
RTD.ExBlo TripCmd Signal: External Blocking of the Trip Command
RTD.Alarm Alarm RTD Temperature Protection
RTD.Trip Signal: Trip
RTD.TripCmd Signal: Trip Command
RTD.WD 1 Trip Winding 1 Signal: Trip
RTD.WD 1 Alarm Winding 1 Alarm RTD Temperature Protection
RTD.WD 1 Timeout Alarm Winding 1 Timeout Alarm
RTD.WD 1 Invalid Winding 1 Signal: Invalid Temperature Measurement Value (e.g caused by an defective or interrupted RTD
Measurement)
RTD.WD 2 Trip Winding 2 Signal: Trip
RTD.WD 2 Alarm Winding 2 Alarm RTD Temperature Protection
RTD.WD 2 Timeout Alarm Winding 2 Timeout Alarm
RTD.WD 2 Invalid Winding 2 Signal: Invalid Temperature Measurement Value (e.g caused by an defective or interrupted RTD
Measurement)
RTD.WD 3 Trip Winding 3 Signal: Trip
RTD.WD 3 Alarm Winding 3 Alarm RTD Temperature Protection
RTD.WD 3 Timeout Alarm Winding 3 Timeout Alarm
RTD.WD 3 Invalid Winding 3 Signal: Invalid Temperature Measurement Value (e.g caused by an defective or interrupted RTD
Measurement)
RTD.WD 4 Trip Winding 4 Signal: Trip
RTD.WD 4 Alarm Winding 4 Alarm RTD Temperature Protection
RTD.WD 4 Timeout Alarm Winding 4 Timeout Alarm
RTD.WD 4 Invalid Winding 4 Signal: Invalid Temperature Measurement Value (e.g caused by an defective or interrupted RTD
Measurement)
RTD.WD 5 Trip Winding 5 Signal: Trip
RTD.WD 5 Alarm Winding 5 Alarm RTD Temperature Protection
RTD.WD 5 Timeout Alarm Winding 5 Timeout Alarm
RTD.WD 5 Invalid Winding 5 Signal: Invalid Temperature Measurement Value (e.g caused by an defective or interrupted RTD
Measurement)
www.eaton.com 965