EMR-4000 IM02602009E
Name Description
RTD.WD 6 Trip Winding 6 Signal: Trip
RTD.WD 6 Alarm Winding 6 Alarm RTD Temperature Protection
RTD.WD 6 Timeout Alarm Winding 6 Timeout Alarm
RTD.WD 6 Invalid Winding 6 Signal: Invalid Temperature Measurement Value (e.g caused by an defective or interrupted RTD
Measurement)
RTD.MB 1 Trip Motor Bearing 1 Signal: Trip
RTD.MB 1 Alarm Motor Bearing 1 Alarm RTD Temperature Protection
RTD.MB 1 Timeout Alarm Motor Bearing 1 Timeout Alarm
RTD.MB 1 Invalid Motor Bearing 1 Signal: Invalid Temperature Measurement Value (e.g caused by an defective or interrupted
RTD Measurement)
RTD.MB 2 Trip Motor Bearing 2 Signal: Trip
RTD.MB 2 Alarm Motor Bearing 2 Alarm RTD Temperature Protection
RTD.MB 2 Timeout Alarm Motor Bearing 2 Timeout Alarm
RTD.MB 2 Invalid Motor Bearing 2 Signal: Invalid Temperature Measurement Value (e.g caused by an defective or interrupted
RTD Measurement)
RTD.LB 1 Trip Load Bearing 1 Signal: Trip
RTD.LB 1 Alarm Load Bearing 1 Alarm RTD Temperature Protection
RTD.LB 1 Timeout Alarm Load Bearing 1 Timeout Alarm
RTD.LB 1 Invalid Load Bearing 1 Signal: Invalid Temperature Measurement Value (e.g caused by an defective or interrupted
RTD Measurement)
RTD.LB 2 Trip Load Bearing 2 Signal: Trip
RTD.LB 2 Alarm Load Bearing 2 Alarm RTD Temperature Protection
RTD.LB 2 Timeout Alarm Load Bearing 2 Timeout Alarm
RTD.LB 2 Invalid Load Bearing 2 Signal: Invalid Temperature Measurement Value (e.g caused by an defective or interrupted
RTD Measurement)
RTD.Aux1 Trip Auxiliary 1 Signal: Trip
RTD.Aux1 Alarm Auxiliary 1 Alarm RTD Temperature Protection
RTD.Aux1 Timeout Alarm Auxiliary 1 Timeout Alarm
RTD.Aux1 Invalid Auxiliary 1 Signal: Invalid Temperature Measurement Value (e.g caused by an defective or interrupted RTD
Measurement)
RTD.Aux2 Trip Auxiliary 2 Signal: Trip
RTD.Aux2 Alarm Auxiliary 2 Alarm RTD Temperature Protection
RTD.Aux2 Timeout Alarm Auxiliary 2 Timeout Alarm
RTD.Aux2 Invalid Auxiliary 2 Signal: Invalid Temperature Measurement Value (e.g caused by an defective or interrupted RTD
Measurement)
RTD.Trip WD Group Trip all Windings
RTD.Alarm WD Group Alarm all Windings
RTD.TimeoutAlmWDGrp Timeout Alarm all Windings
RTD.WD Group Invalid Winding Group Signal: Invalid Temperature Measurement Value (e.g caused by an defective or interrupted
RTD Measurement)
www.eaton.com 966
To Next Page
Loading...
