Eaton EMR-4000 - Page 967

EMR-4000 IM02602009E
Name Description
RTD.Trip MB Group Trip all Motor Bearings
RTD.Alarm MB Group Alarm all Motor Bearings
RTD.TimeoutAlmMBGrp Timeout Alarm all Motor Bearings
RTD.MB Group Invalid Motor Bearing Group Signal: Invalid Temperature Measurement Value (e.g caused by an defective or
interrupted RTD Measurement)
RTD.Trip LB Group Trip all Load Bearings
RTD.Alarm LB Group Alarm all Load Bearings
RTD.TimeoutAlmLBGrp Timeout Alarm all Load Bearings
RTD.LB Group Invalid Load Bearing Group Signal: Invalid Temperature Measurement Value (e.g caused by an defective or
interrupted RTD Measurement)
RTD.Trip Any Group Trip Any Group
RTD.Alarm Any Group Alarm Any Group
RTD.TimeoutAlmAnyGrp Timeout Alarm Any Group
RTD.Voting Trip Grp 1 Voting Trip Group 1
RTD.Voting Trip Grp 2 Voting Trip Group 2
RTD.Timeout Alarm Alarm timeout expired
RTD.Trip Aux Group Trip Auxiliary Group
RTD.Alarm Aux Group Alarm Auxiliary Group
RTD.TimeoutAlmAuxGrp Timeout Alarm Auxiliary Group
RTD.AuxGrpInvalid Invalid Auxiliary Group
RTD.ExBlo1-I Module Input State: External Blocking1
RTD.ExBlo2-I Module Input State: External Blocking2
RTD.ExBlo TripCmd-I Module Input State: External Blocking of the Trip Command
BF.Active Signal: Active
BF.ExBlo Signal: External Blocking
BF.Waiting for Trigger Waiting for Trigger
BF.Pickup Signal: BF-Module Started (Pickup)
BF.Trip Signal: Breaker Failure Trip
BF.Lockout Signal: Lockout
BF.Res Lockout Signal: Reset Lockout
BF.ExBlo1-I Module Input State: External Blocking1
BF.ExBlo2-I Module Input State: External Blocking2
BF.Trigger1-I Module Input: Trigger that will start the BF
BF.Trigger2-I Module Input: Trigger that will start the BF
BF.Trigger3-I Module Input: Trigger that will start the BF
TCM.Active Signal: Active
TCM.ExBlo Signal: External Blocking
TCM.Pickup Signal: Pickup Trip Circuit Supervision
www.eaton.com 967