User Menu Options
Page 50
The level-4 user is able to:
a) Update the firmware and language files at the control
unit using the web interface.
b) Log into the user menu or web interface and change
the level-4 user name and code.
The level-4 user cannot perform other tasks, such as to
set or unset the system, omit zones, etc.
To switch facilities on or off:
1. Select System Config – Facilities On/Off .
2. Use or to choose the facility, then or to switch it on or off.
3. Press .
Setting the date and time
Master and admin users can use System Config – Set Date & Time to set
the date and time. You may need to do this if, for example, the control unit
lost all power for an extended period of time.
Select the option, enter the date (dd/mm/yyyy) and then the time.
Note: The installer may have set up the control unit to obtain its time
automatically from an SNTP server. The internal clock adjusts itself for
daylight saving in Spring and Autumn.
Configuring calendar sets
Master and admin users can use System Config – Calendar Set to
configure the control unit to set or unset the alarm system (or parts of it) at
fixed times of day on a seven-day cycle. If the system is a part-setting
system, you can use this option to full set or part set B, C or D. If the
system is a partitioned system, this option allows you to full set or part set
any collection of partitions.
There are two basic elements that you can program within the calendar set
option: the “event” and the “exception”. An event defines an action (setting,
part setting or unsetting) to occur regularly at set times and days. An
exception defines periods such as holidays when you do not want the event
to occur. The number of events and exceptions the control unit can store is
dependent on the control unit model.
Hint: Set up exceptions first, and then the events.
To Next Page
Loading...
Need help?
General
