Introduction
Page 3
System Components
An i-on Next Generation alarm system can contain many different types of
device, depending on the requirements of the installation. Figure 1 and the
following sections give an overview of key components of interest to users.
1. Two-button Hold Up Alarm
long range.
2. Two-button Hold Up Alarm.
3. One-way remote control.
4. Two-way remote control.
5. Keypad (i-kp01) .
6. Keypad (KEY-K01, KEY-
KP01, KEY-KPZ01 or KEY-
RKPZ)
7. Keypad (i-RK01) one-way
radio (arming) keypad.
8. Keypad (KEY-FKPZ) flush-
mount keypad.
9. Door contact/universal
transmitter.
10. Smoke detector.
11. Passive infra-red detector.
12. External siren/strobe.
Figure 1. Peripherals
The control unit
At the heart of an i-on alarm system is the control unit, which is often
installed in a cupboard or elsewhere that is out of sight.
To Next Page
Loading...
Need help?
General
