User Menu Options
Page 34
Press # to change between capitals and lower case letters. The cursor is
an underline for small letters and a block for capitals.
Press to move the cursor left, or to move the cursor to the right.
Press to remove letters to the left of the cursor. Press to insert a
space.
Figure 8. Letters assigned to keys
Omitting zones
This option allows you to omit one or more zones. Omitting a zone prevents
it from generating an alarm if the zone is triggered while the system is set.
For example, if a zone protects a garage door, you may want to omit the
zone to enable the delivery of a parcel while the system is set.
Note: The control unit un-omits the zones when the system is unset. If you
want to keep a zone omitted, you have to omit the zone again before you
next set the system. Alternatively, use shunt groups (see the next section).
Note: You can omit only those zones that the installer has given the
Omittable attribute.
To omit zones:
1. Select Omit Zones. The bottom line displays the first zone you can
omit:
To Next Page
Loading...
