User Menu Options
Page 55
To edit the Contacts List:
1. Select System Config – Contacts.
The first recipient (contact) you are able to edit is displayed:
2. Press or followed by to select the recipient you want to edit.
3. Press or followed by to select one of the following options:
Name Select this to edit the name of the recipient. See
page 33 for details of how to enter text.
Tel No 1 The first telephone number of the recipient.
Tel No 2 The second telephone number of the recipient.
Email The recipient's email address.
IP Address The recipient's IP address.
Press when you have finished editing the setting, and if required,
select another setting to edit.
4. Press several times to exit.
Editing outputs
Master and admin users can use System Config – Edit Outputs to edit the
on and off times of any output the installer has configured as "User
Defined".
Note: Master, admin, normal and partition users can activate or deactivate
user-defined outputs at any time (see page 62).
To edit an output:
1. Select System Config – Edit Outputs.
The first output you are able to edit is displayed:
The top line shows the address and type of the output. In the above
example, the address is PAN>01 and the type is W (wired). The
bottom line shows the name of the output.
To Next Page
Loading...
