Eaton i-on40H - User Administration and System Testing

User Menu Options
Page 36
Activating or deactivating a shunt group
A master or admin user can activate or deactivate a shunt group from a
keypad as follows:
1. Select Shunt Groups. The first shunt group set up by the installer is
displayed:


2. Press  or  to select the shunt group.
3. Use  to change the setting to Yes (zones in shut group will be
shunted) or No (zones will be unshunted).
4. Press  to confirm the change.
Managing users
Selecting Users from the main menu has two functions, depending on your
user type:
a) If you are a normal or partition user, you can use the Users option to:
 Change your access code.
 Add or delete your own proximity tag, remote control or radio
Hold-Up Alarm (HUA) transmitter.
 In a partitioned system, specify the partitions that a two-way
remote control can set, unset, etc. (not available for a one-way
remote control).
These tasks are described in the next section.
b) If you are a master or admin user, the Users option displays additional
options that allow you to:
 Add new users to the system, including the proximity tag, remote
control and HUA transmitter allocated to each user (Users – Add
User). See page 37.
 Edit user details (Users – Edit User). See page 40.
 Delete users (Users – Delete User). See page 41.