Eaton i-on40H - Page 42

User Menu Options
Page 38
To add a new user:
1. Select Users – Add User.
2. The next available default user name is displayed:


If you wish, edit this default name of the user (12 characters
maximum). If required, please refer to page 33 for details of how to
edit text. Press  to continue.
3. The default user type is displayed (normal user):


Press  or  to select the user type (see page 10). Press  to
continue.
4. If you are using a partitioned system, and are adding a user other than
a master user or Shunt Code user, you are prompted to specify the
user's partitions:


By default, a new user belongs to all partitions. Press  or  to scroll
through the partitions and  to change the setting to Yes or No. Press
 to continue.
5. You are prompted to specify an access code for the user:


Enter an access code, or  if you do not want to assign one. When
prompted, enter the code a second time.
6. You are prompted to assign a proximity tag to the user:


Present an unallocated tag to the keypad until you see "Prox Tag
added", or  if you do not want to assign one.