Parameters
94 M-Max Series Adjustable Frequency Drive MN04020003E—October 2013 www.eaton.com
Protective Functions, continued
PNU ID
Access
RUN Value/Range Description
Factory Setting
(P1.3)
P8.14 733 — Fieldbus error 2
Reaction to a fieldbus error if the fieldbus is set as active control
level (BUS) (P6.1 = 2, P6.17 = 2)
0 Deactivated
1 Alarm (AL 53)
2 Fault (F…53), stop function according to P6.8
P8.15 734 — Fieldbus interface error 2
Reaction to a fieldbus interface error (slot) at the frequency
inverter or when the fieldbus interface card is missing when the
fieldbus is set as active control level (BUS) (P6.1 = 2, P6.17 = 2)
0 Deactivated
1 Alarm (AL 54)
2 Fault (F…54), stop function according to P6.8
To Next Page
Loading...
Need help?
General