INSTALLATION
Eaton 5125 Rack-Mount UPS (5000/6000 VA) User's Guide S 164201541 Rev D
www.eaton.com/powerquality
25
C A U T I O N
The UPS and EBM are heavy (see page 62). A minimum of two people are required to lift the
cabinets into the rack.
NOTE The EBMs must be installed below the UPS as shown in Figure 8.
10. Slide the UPS and any optional EBMs into the rack.
11. Secure the front of the cabinet to the rack using two hex-head
screws in the top and bottom positions of each mounting bracket
(see Figure 8). Repeat for each cabinet.
Optional
EBM
UPS
Hex-Head
Screws
Figure 8. Securing the Mounting Brackets
To Next Page
Loading...
