UPS SETUP
EATON Powerware
®
9155 UPS (8–15 kVA) User’s Guide S 164201553 Rev F www.powerware.com
10
NOTE Be sure to support the front and back of the cabinet when rolling it off the pallet to prevent tipping.
7. Slowly roll the cabinet toward the rear of the pallet. Once the pallet tilts, continue
rolling the cabinet down the pallet until the cabinet touches the floor (see
Figure 4).
If needed, adjust the leveling feet so that the cabinet will roll.
Figure 4. Unloading the Cabinet
8. With the cabinet supported, slowly pull the pallet away from the cabinet (see
Figure 5).
Figure 5. Removing the Pallet
9. Roll the cabinet to the desired location.
To Next Page
Loading...
