3 Safety regulations
3.3 Mandatory requirements, personnel
14 MICRO PANEL XVS400 10.4"/12.1"/15" 10/2011 MN04802012Z-EN www.eaton.com
3.3.6 Requirements for proper operation
The following points must be observed so that the device meets the contractual requirements:
Only qualified personnel may work with the device.
These persons must have read the Operating Instructions and must observe the requirements
described.
The ambient conditions stated must be observed. See Chapter 9.9 Ambient conditions, 63.
The maintenance work must be carried out correctly.
No liability is accepted for damage, consequential damage and accidents caused by the following:
Failure to observe work safety regulations
Failure or malfunction of the device
Improper handling or use
Failure to observe the Operating Instructions
Conversions, modifications and repairs to the device
To Next Page