8 Storage, transport and disposal
8.4 Disposal
54 MICRO PANEL XVS400 10.4"/12.1"/15" 10/2011 MN04802012Z-EN www.eaton.com
8.4 Disposal
Devices that are no longer used must be properly disposed of in accordance with the applicable national
regulations or returned to the manufacturer or sales office.
Materials used in the
device
Tab. 18 Materials used in the device
Materials used in the
packaging
Tab. 19 Materials used in the packaging
DANGER
Explosive and toxic materials
Any improper handling causes a risk of explosion due to the lithium battery soldered
in the device and a risk of poisoning due to the mercury content of the cold cathode
tubes.
Dispose of the device properly.
Component Material
Housing Galvanized sheet steel
Front plate Aluminum, Peraluman 101 anodized
Infra-red frame Polycarbonate (PC)
Infra-red touch protective panel Glass
Resistive touch back panel Glass with polyester foil
Cold cathode tubes Mercury (< 5 mg)
Battery Lithium
Electronic components Various
The materials used for our housings are halogen-free.
Packaging Material
External packaging Cardboard
Internal packaging:
10.4" and 12.1" devices
Cardboard with PE foil
Plastic bag: Polyethylene (PE)
15" devices
Closed-cell polyethylene foam, CFC-free
Plastic bag: Polyethylene (PE)
To Next Page