6 Operation
6.2 Starting the device
MICRO PANEL XVS400 10.4"/12.1"/15" 10/2011 MN04802012Z-EN www.eaton.com 45
2 Energize the device.
The device will boot.
3 If the device does not boot up and/or if an error message appears while starting (booting) the
device, see Chapter 7.4 Troubleshooting, 51.
4 Complete the following steps after initial commissioning
(→ Document «MN05010007Z-EN System Description Windows CE»):
4.1 Adjust the system settings of the device.
4.2 Install the required application programs.
The lifespan of the backlight can be increased by reducing the brightness (→ Document
«MN05010007Z-EN System Description Windows CE»).
To Next Page
Loading...