What does 'WARN: CASING TEMP HIGH' mean on my EBARA Water Pump?
If your EBARA Water Pump displays 'WARN: CASING TEMP HIGH', it could be due to a rise in pump back pressure, an increase in the gas load, accumulation of by-product, or reduced cooling water flow. Check the exhaust pipe, reduce the inflow gas amount, replace or overhaul the pump, or increase cooling water flow.
Why does nothing appear on the LCD of my EBARA EV-S20P Water Pump?
If the LCD on your EBARA Water Pump shows nothing, it could be due to several reasons. First, check the power supply to ensure the pump is receiving power. Next, verify that the connector is properly connected. Also, make sure the CP is turned ON. Check the LCD’s connector to ensure that it is connected. If none of these steps resolve the issue, the instrument may have failed and need replacement.
What causes 'ALARM: CASING TEMP H.HIGH' on my EBARA EV-S20P Water Pump?
If your EBARA Water Pump displays 'ALARM: CASING TEMP H.HIGH', the pump back pressure may be rising, there may be an increase in the gas load, cooling water flow may be reduced, or there may be an accumulation of by-products. Check the exhaust pipe, reduce the inflow gas amount, cool the pump thoroughly and reset it, or replace or overhaul the pump.
What does 'WARN: WATER FLOW LOW' mean on my EBARA Water Pump and how do I fix it?
If the EBARA Water Pump displays 'WARN: WATER FLOW LOW', it could be due to several reasons: * Coupler is disconnected, so connect it. * Pressure is insufficient, so apply sufficient pressure. * Root valve is closed, so open the valve. * Water pipe is clogged, so clean or replace the piping. * Tube fittings are loosened, so re-tighten them. * Instrument failure, so replace the instrument. * Outlet & inlet pipes are reversed, so connect the pipes correctly.
Why is my EBARA EV-S20P making abnormal noises and vibrating excessively?
If your EBARA Water Pump is experiencing abnormal noise and excessive vibration, here are a few possible causes: * The adjustment feet may not be applied, so use them. * Some object might be making contact with the outer cover, so remove it. * The fastening screws of the outer cover may have worked themselves loose, so tighten them. * Parts of the pump may be damaged, requiring you to replace or overhaul the pump.
What to do if EBARA EV-S20P shows ALARM: WATER FLOW LOW?
If the EBARA Water Pump displays 'ALARM: WATER FLOW LOW', several issues could be the cause. It might be that the coupler is disconnected, the pressure isn't sufficient, the root valve is closed, the water pipe is clogged, tube fittings are loosened, there's an instrument failure, or the outlet and inlet pipes are reversed. To resolve this: * Connect the coupler if disconnected. * Apply sufficient pressure. * Open the valve if it's closed. * Clean or replace the piping if clogged. * Re-tighten any loose tube fittings. * Replace the instrument if there is an instrument failure. * Connect pipes correctly if they are reversed.
Why is the circuit protector activated on my EBARA EV-S20P?
If the circuit protector is activated on your EBARA Water Pump, it could be due to incorrect wiring or a short circuit. Check the wiring first. If that's not the problem, the pump may have a short circuit, requiring replacement or overhaul.
Identifies the product as a multi-stage dry vacuum pump.
Warning about lifting operations and qualified personnel.
Instructions on installing CB and interrupting CP before work.
Use N2 gas for diluting flammable/toxic gases and purging piping.
Warning against using the pump for a different process without prior overhaul.
Check for leaks after installing/maintaining piping to avoid hazardous discharge.
Warning against performing withstand voltage tests to avoid damage.
Warning against unauthorized modifications to pump parts or members.
Specific instructions on using M6x12 and M6x16 bolts for lifting brackets.
Caution about hot surfaces and contact with humans/flammable substances.
Safety caution against operating the pump without its cover.
Periodically check safety interlocks to ensure correct operation.
Ebara does not assume risks from mixing gases; users must pay attention.
Warning about hot surfaces that can cause burns.
Warning about hazardous materials that can cause fire, explosion, or poisoning.
Warning about hazardous voltage that can cause shock, burn, or death.
Warning about heavy objects causing injury from falling or tipping.
Reiteration to check safety interlocks every 6 months.
Lists conditions that void the warranty or are not covered.
Procedures for safely shutting off electrical power for maintenance.
Instructions for moving and securing the pump.
Instructions for connecting vacuum and exhaust pipes, including cautions.
Instructions for connecting cooling water pipes and water quality specifications.
Instructions for connecting N2 gas tubing and fittings.
Caution to turn off power and lockout before wiring.
Diagrams showing power supply and control signal connector positions for EV-S20 and EV-S50.
Diagrams showing power supply and control signal connector positions for EV-S100/200.
Tables and diagrams for power supply receptacle pin assignments and specifications.
Emphasizes that electrical wiring must be done by qualified electricians.
Warning to connect the grounding wire properly.
Details the function and system flow of the optional EMS switch box.
How to start and stop the pump using one or two LCD controllers.
Steps to take before starting the pump, including checking water and N2 supply.
Warnings about high temperatures of pump and piping during/after operation.
How to start and stop the pump using the controller's START/STOP buttons.
How to start and stop the pump via communication interface.
How to start and stop the pump using external signals.
Maintenance on vacuum and exhaust piping and safety precautions.
Importance of checking for gas leaks after maintenance.
Precautions for handling toxic gases during disconnection.
Safety measures for disassembly and cleaning.
Safety warnings to be observed before starting maintenance.
Table of basic troubleshooting steps for common abnormal symptoms.
Table of troubleshooting steps for WARNING messages displayed on the LCD.
Table of troubleshooting steps for ALARM messages displayed on the LCD.
Table of troubleshooting steps for optional features and alarms.
General| Model | EV-S20P |
|---|---|
| Category | Water Pump |
| Manufacturer | EBARA |
| Frequency | 50 Hz |
| Impeller Material | Stainless Steel |
| Outlet Diameter | 50 mm |
To Next Page
