ECD 100-181 - Page 59

M O T I O N
• Once the lift has reached the top floor the lift shall revert to normal operation.
• The HEX value/count of each floor can be viewed by pressing the “∧” button to scroll through to the various
levels
“Pos Count” displays the
current lift position in HEX
Level 1 stored HEX
Position Count
Level 2 stored HEX
Position Count
The hex count for each floor/level should be recorded in the following Pulse distance table;
01- NOR IDL ][
Pos.Count. 0040
01- NOR IDL ][
Level 1 0040
01- NOR IDL ][
Level 2 012C