EasyManuals Logo

Echo EGi-1200 User Manual

Echo EGi-1200
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #27 background imageLoading...
Page #27 background image
27
7.2 Carburetor adjustment
The carburetor is a vital part of the engine. Adjusting should be left to our
company authorized dealer with the professional knowledge, specialized date,
and equipment to do so properly.
7.3 Engine oil replacement
WARNING
Avoid draining the engine oil immediately after stopping the engine. The
oil is hot and should be handled with care to avoid burns.
1. Place the generator on a level surface and warm up the engine for
several minutes. The stop the engine and turn the 3-in-1 switch
knob, fuel tank cap air vent knob to “OFF”.
2. Remove the screws (1) and then remove the cover (2).
3. 
4. Place an oil pan under the engine. Tilt the generator to drain the oil
completely.
5. Place the generator on a level surface once again.
NOTICE
Do not tilt the generator when adding engine oil. This could result in

MAINTENANCE
1200I
2100I
Refilling Port
EGI1200

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Echo EGi-1200 and is the answer not in the manual?

Echo EGi-1200 Specifications

General IconGeneral
BrandEcho
ModelEGi-1200
CategoryInverter
LanguageEnglish

Related product manuals