31
8. STORAGE
Long term storage of your machine will require some preventive procedures to
guard against deterioration.
8.1 Drain the fuel
1. Turn the 3-in-1 switch knob to “OFF” (1) .
2.
tank into an approved gasoline container. Then, install the fuel tank cap.
WARNING
•
INFORMATION” (See page 6) carefully.
NOTICE
•
may deteriorate painted surfaces or plastic parts.
3. Start the engine (See Page 18) and leave it running until it stops. The engine
stops in approx. 20 minutes by running out of fuel.
TIP: Do not connect with any electrical devices. (unloaded operation)
Duration of the running engine depends on the amount of the fuel left in the
tank.
4. Remove the screws, and then remove the cover.
5. Drain the fuel from the carburetor by loosening the drain screw on the
6. Turn the 3 in 1 switch to “OFF”.
7. Tighten the drain screw.
STORAGE
To Next Page
Loading...
Need help?
General
