29
The engine should never run without the foam element;
excessive piston and cylinder wear may result.
7. Instal
8. Install the cover and tighten the screws.
7.5 Muer screen and spark arrester
WARNING
•
part of your body or clothing during inspection or repair.
1. Remove the screws (1), and then pull outward on the areas of the cover (2)
shown.
(5) and spark arrester (6).
wire brush.
NOTICE
• When cleaning, use the wire
brush lightly to avoid damaging or
spark arrester.
5. Install the spark arrester.
MAINTENANCE
1200I
To Next Page
Loading...