PPF-225 OPERATION
X7507820701 25
© 09/19 ECHO Incorporated
Adjusting Automatic Oiler
1. From bottom of gear case, turn
adjustment screw (A) clockwise
to decrease oil volume, or
counterclockwise to increase oil
volume.
Note: The automatic oiler is
preset to deliver a
sufficient oil discharge
volume during normal
operating conditions.
During heavy or dry
cutting conditions, the oil
discharge volume may be
increased to assure adequate lubrication. If oil is leaking from
the bar cover area, reduce the oil discharge volume. Refill the
oil reservoir with each tank of fuel.
Note: Very little visible oil on the saw chain will provide sufficient
lubrication.
Starting Cold Engine
The attachment will operate immediately when the engine
starts, and could result in possible serious injury. Keep
movable parts of the attachment away from objects that could
become entangled or thrown, and surfaces that could cause
loss of control.
1. Stop Switch
Move stop switch button (A)
forward, away from the STOP
position.