Echo PPF-225 - Maintenance Intervals Chart

PPF-225 MAINTENANCE
X7507820701 31
© 09/19 ECHO Incorporated
Maintenance Intervals
IMPORTANT NOTE - Time intervals shown are maximum. Actual use and
your experience will determine the frequency of required maintenance.
MAINTENANCE PROCEDURE NOTES:
1 Apply lithium based grease every 25 hours of use.
COMPONENT/SYSTEM MAINTENANCE PROCEDURE
REQ’D
SKILL
LEVEL
Daily or Before Use
Air Filter Inspect/Clean * 1
Choke Shutter Inspect/Clean * 1
Fuel System Inspect
2
1
Cooling System Inspect/Clean 2
Recoil Starter Rope Inspect/Clean * 1
Screws/Nuts/Bolts Inspect/Tighten/Replace * 1
Guide Bar/Sprocket Nose Inspect/Clean/Lubricate * 2
Saw Chain Inspect/Sharpen/Replace/Tension * 2
Every Refuel
Fuel System Inspect
2
1
Guide Bar/Sprocket Nose Inspect/Clean/Lubricate * 2
Saw Chain Inspect/Sharpen/Replace/Tension * 2
3 Months
Air Filter Replace * 1
Fuel Filter Inspect * 1
Fuel Cap Gasket Inspect * 1
Spark Plug Inspect/Clean/Replace * 1
Muffler Spark Arrestor Inspect/Clean/Replace * 2
Cylinder Exhaust Port Inspect/Clean/Decarbon 2
Drive Shaft (Flex Cable
Models)
Grease
1
2
Yearly
Fuel Filter Inspect/Replace * 1
Fuel Cap Gasket Replace * 1