To Next PageTo Next Page
Need help?Do you have a question about the Echo SRM-510ES and is the answer not in the manual?
Defines DANGER, WARNING, and CAUTION symbols for hazard communication.
Precautions against fire and burns during refuelling operations.
Instructions on preventing and cleaning fuel spills to avoid ignition risks.
Requirement to move at least 3m away from refuelling spot before starting the engine.
Essential safety checks and procedures before and during engine starting.
Warning against touching hot engine parts or high-voltage components.
Steps to take if fire or smoke appears from the engine area.
Safety warnings regarding blade rotation at idle and shield usage.
Instructions to stop the engine and secure the blade when moving the product.
Mandatory requirement for proper training and protective equipment before operation.
Instruction to remove foreign objects from the work area to prevent ricochets.
Steps to turn off the engine immediately if the product vibrates abnormally or hits an obstruction.
Explanation of kickback and how to prevent it by proper trimming techniques.
Guidelines for using metal blades, reaction forces, and inspecting for cracks.
Precautions for nylon line usage, avoiding nearby hazards, and wire contact.
Detailed list of essential protective gear including head, ear, eye, hand, foot, and body protection.
Steps for attaching the nylon line cutting head using the locking tool.
Critical safety warning regarding the secure fitting of housing pawls for cutting head.
Procedure for installing the blade, including inspection and tightening of components.
Critical DANGER warnings regarding fuel flammability and refuelling procedures.
Information on fuel mixture, storage, and safe refuelling practices.
Step-by-step guide for starting a cold engine, including choke and purge bulb usage.
Warnings against trimming near roads, traffic, or people due to thrown objects.
Essential instructions for safe operation with a metal blade, including avoiding obstructions.
Guidance on selecting the right blade, inspecting for damage, and avoiding dull or cracked blades.
Detailed explanation of kickback and how to avoid it by proper blade contact.
Safety measures regarding danger zones, abnormal vibration, and blade security.
General
