Eclipse CD3200 User Manual

Making changes with Display Adjustment Mode
75
XIII
ATTENTION
• When playing a music file in USB memory,
E-iSERV data stored in the USB memory
cannot be read into the main unit.
• To load data into the main unit, you have to
make a special folder. For detailed
information about how to make the folder,
refer to the E-iSERV manuals.
Changing the scroll type (Scroll
Type)
The scroll type of the text display can be
changed.
The scroll type setting mode is
activated.
Each time the button is pressed, the
scroll type changes in the following
order.
Once ↔ Repeat
Once:
Scrolls the text once before changing
to a fixed display.
Repeat:
Repeats scrolling the text.
The selected settings will take effect.
CAUTION
1
2
On the CD-R or USB memory, if there is no
file whose data type is the one you
selected, the "NO DATA" message will be
displayed and return to the previous
screen.
CAUTION
1
2
• Do not turn the ignition switch or the
power to the main unit ON or OFF (or
remove the front panel of the main
unit) while data reading is in progress.
Data reading will be interrupted and
data may be damaged.
• Only the [VOL] button can be
operated while the system is reading
data.
1
Press the [SELECT] (Up/Down)
button to select the Scroll Type.
2
Press the [ENTER] button.
3
Press the [SELECT] (Up/Down)
button to select the scroll type.

Eclipse CD3200 Specifications

General

Brand	Eclipse
Model	CD3200
Category	Car Stereo System
Language	English