Program Menu
1. Account Menu
2. Quick Setup
3. System Menu
4. Formula Menu
5. Prime Pump
6. Calibration
7. View System Info
8. Diagnostics
5. PRIME PUMP
2.5.1 Submenu #5.1 Prime Pump>Prime Pump
Prime a product to purge air from the product pickup tubes.
Prime Pump #5.1
Choose a pump to prime
Do you want to continue?
Prime Pump>Select a Pump #5.1.1
1. PUMP 1
2. Pump 2
3. Pump 3
Prime Pump>Pump 1>Prime Pump #5.1.2
1. PUMP 1
User is informed of the priming procedure.
Note: Primed product will be directed to the washer.
Select a Pump
The user is instructed to choose a particular pump (#1 - #3) to prime
Begin Prime
Once the pump has been selected, the user can begin priming. Maximum prime time is 30
seconds. A mandatory 30 second flush will start at the end of the 30 second prime or if the Stop
command is pressed. If product has not reached pump head after a 30 second prime, repeat
procedure.
Stop pump prime (when product reaches pump head)
To Next Page
Loading...
