Chemical hazards (dosing medium/active substance)
DANGER!
Risk of injury to the skin and eyes caused by the chemical used (dosing
medium).
–
Read the enclosed safety data sheet carefully before using the dosing
medium.
– The safety regulations and the prescribed protective clothing must be
complied with when working with chemicals.
– Attention must be paid to the information included on the product data
sheet of the dosing medium used.
ENVIRONMENT!
Leaked, spilled dosing media can harm the environment.
Leaked, spilled dosing media must be cleaned and disposed of correctly
,
according to the instructions on the product data sheet.
It is essential to ensure that required personal protective equipment is used.
2.9 Installation, Maintenance and Repairs
NOTICE!
Material damage by using incorrect tools!
Material damage may arise by using incorrect tools during assembly
,
maintenance or troubleshooting. Only use the correct tools.
DANGER!
Damage and physical harm can occur due to incorrectly performed
installation, maintenance or repair work.
–
All installation, maintenance and repair work must only be performed by
authorised and trained specialist personnel in accordance with the
applicable local regulations.
– The safety regulations and the prescribed protective clothing must be
complied with when working with chemicals. Attention must be paid to the
information included on the product data sheet of the dosing medium used.
– Prior to installation, maintenance and repair works the feeding of the dosing
medium should be disconnected and the system cleaned.
NOTICE!
Only original equipment spare parts may be used for maintenance and
repairs.
Safety
17 Rev. 04-06.2018
To Next Page
Loading...
