4.4 Operating level
4.4.1
Beverage mode
4.4.1.1 Beverage mode: initial start-up / reset
Fig. 6: Beverage mode: initial start-up / reset
1 Fill level of mixing container
2 Cleaning intervall reached.
3
key: last cleaning
4 Days until ‘ Beer
-Cut’
5
Activates "Cleaning mode"
Ä
Chapter 4.4.2 ‘Cleaning mode’ on page 23.
6
Activates "Rinsing mode"
Ä
Chapter 4.4.3 ‘Rinsing mode’ on page 26.
Display of "last cleaning"
There are no cleaning protocols at initial start up or reset. In this case, the user can set
the weeks (0-8) since last cleaning.
Fig. 7: Display of last "cleaning"
1.
After pressing "last cleaning" key the display change to "last cleaning".
2. In field "weeks" the following settings can be done:
0 = cleaning today
, 1 = cleaning a week ago, 2 = cleaning two week ago and so on
up to 8 = cleaning was eight weeks ago.
Control / Visualisation
21 Rev. 04-06.2018
To Next Page
Loading...
