110005307
•
connections for all pipe connections to the unit for
easy maintenance and disassembly.
• The connection for water must be made at the
• Minimum diameter of the supply pipe must be at
•
•
To minimize pressure loss in the supply line:
•
•
•
5.7. Air connection
-
tion 3.5.
•
pipe system must be carefully rinsed in order to
• The unit requires an air supply boosting.
• -
tings.
>20 sec.
5.8. Supply of product
• It is important to rinse the system with clean water
between product changes and after use for safety
-
tainance.
5.8.1. User pack system
Installing a user pack:
1.
2.
Rinsing the system:
1.
containing clean water.
2.
for 20 seconds to rinse the system.
3. The system is now ready to be used with a new
product.
5.8.2. Can holder system
Installing a can:
1. Insert the can in the holder.
2.
3. Put the suction hose into the can below the product
5.
foam or spray operation.
To Next Page
Loading...
