110009197
6. System preparation
6.1. Start up of new system
these guidelines.
6.2. Bleeding guidelines
6.2.1. Bleeding the pipe system
• Close water and air supply after use.
•
the water pipe.
•
longed shutdowns.
6.2.2. Bleeding the pump (MA only)
•
to the top of the pump.
• Stop the pump.
•
until only water flows.
• Tighten the relief plug.
•
A
• The mainstation is now ready for use.
6.3. Adjustments
6.3.1. Instruction and setup
instructions.
6.3.2. Adjustment of air
-
wise for pressure decrease.
6.3.3. Adjustment of product - manual block
nozzle located in the suction nipple of the non-return
•
•
-
ance.
To Next Page
Loading...
