20
7. Operation
Wear glasses when using the unit.
when using the unit.
Safety boots must be worn.
• -
eration instructions.
•
setting up automatic wash programs and area
• Only trained personnel are allowed to operate
guidelines.
7.1. Start/Stop
• Close water and air supply after use.
•
Start
1. Verify that water and air supplies for the system
are open.
2. Ensure water and air supply to unit is open.
3.
Select the desired function and follow the instruc-
Stop
1.
on the control display (refer to image below).
PWash Program 1, 00:01:28
2. Turn off the water supply.
3. Close the air supply.
-
the direct piping system.
To Next Page
Loading...
