Ecom B - Important Hints

Page 4
ecom-B
Important Hints
The ecom
-
B meets the requirements
of the DIN EN 50379 Part 2.
The ecom
-
B may not be used for continuous
emission control!
Following minimum times must be kept to get
correct measurement results:
-1 Minute for fresh air calibration
-2 Minutes to get stable measurement results
Following substances affect the function of the
instrument:
-solvent containing gases as in:
- cleaning agents
- fat remove agents
- wax polish
- adhesives
-Formaldehyde
Settings on fireplaces should just be made by
professionals who are experienced with the
function and adjustments of fireplaces!
1. Charge the battery
regularly (Charge not
used instrument min. once a month)!
2. Never store the instrument with unloaded
battery!