Ecom B - 3 Choose a Storage Location

Page 8
ecom-B
3. Input or select a data record (Option)
The ecom-B has 300 storage locations
(option). In order to call up a data record
with data are already stored in the instru-
ment or to create a new file, choose a data
record with the Cursor keys and confirm
with <Enter>
If you are choosing an empty data record, a designation (max. 16
indications) can be assigned. Proceed as follows:
-choose a keyboard with the <CAL.> key (5 keyboards are available)
-select a character with the keys <Store> (left), <Print> (right) and
the Cursor keys <up/down> (selected character is black deposits)
-take over the character with <Enter>
-repeat procedure, until desired designation is complete
-if you want to correct a character, proceed as follows:
-interrupt the selection with <Standby>
-select the character with the keys <Store> (left), <Print> (right)
and the Cursor keys <up/down>
-activate the selection with <Standby> and select the correct
character
-turn to Combustion measurement with 2 x <ESC> , „Comb. meas-
urem.“ and <Enter>.
If you are choosing a data record with data, you can call up the data
with <Enter> / <Store> / <Enter>. Now you can view the data with
the Cursor keys <up/down>.
Memory number 0
Data record
is empty !
Confirm with :
↑↓
↵
↵↵
↵